General Information; Scope Of These Instructions; Designated Use; Product Description - PAW DN 40 Manual De Instrucciones Para El Montaje Y Manejo

1 General information

1.1

Scope of these instructions

These instructions describe the function, installation and commissioning of the modular
distribution manifolds DN 40 and DN 50. The chapters called [specialist] are intended for
specialists only.
1.2

Designated use

The distribution manifold may only be used in hydronic heating closed-loop systems taking into
consideration the technical limit values indicated in these instructions. Improper usage excludes
any liability claims.
Only use PAW accessories in combination with the distribution manifold.
The wrapping materials are made of recyclable materials and can be disposed of with
recyclable materials.
1.3

Product description

The distribution manifolds DN 40 and DN 50 are modular, completely insulated brass manifolds
for hydronic heating. Depending on the size they consist of two to four pre-assembled modules
and two to four heating circuits can be connected to the manifold.
The PAW heating circuits DN 40 can be directly mounted onto the distribution manifolds DN 40
without any other accessories.
The PAW heating circuits DN 50 can be directly mounted onto the distribution manifolds DN 50
without any other accessories.
Reducer flanges are available as accessories, so that you can also mount heating circuits of
smaller dimensions onto the manifolds.
B-2 99x11x-mub-ml – V02
1 General information
2009/07