Marmitek Speaker Anywhere 650 Manual De Instrucciones página 10

Speaker Anywhere 650
audio receiver (RX)
Please ensure that the ON/OFF switch on the audio receiver is in the off
position.
Connect the 18V power adapter (D) to the audio receiver and a power outlet.
5.3 Switching on
Once all the connections are done, you can start using the
Speaker Anywhere 650. First, turn on your AV Receiver and play audio at low
volume. Please ensure that the volume button on the Anywhere receiver (RX)
is approximately in the middle position. Always turn on the transmitter first.
The blue LED will now start to flash slowly. Turn on the receiver. The LEDs
on both the transmitter and the receiver will now be blue continuously,
indicating that they are paired. Now, adjust the volume on the
Speaker Anywhere receiver (RX) as required.
5.4 Pairing
The Speaker Anywhere 650 transmitter
and receiver are already paired. If the
LEDs on the transmitter and receiver
continue to blink slowly, you can pair the
set again.
At the back of the receiver, press the
pairing button for a few seconds.
The LED will now flash quickly.
Then, also press the pairing button at the back
of the transmitter for a few seconds. The
transmitter will now instantly connect to the
receiver, and the LEDs will light up continuously.
10 © MARMITEK