Lacme L.BOX LD Iinstrucciones De Empleo página 24

8
QUICK SETUP
CREATE AN ACCOUNT
ON THE LBOXLD APPLICATION
www.Lc1.fr/alb
Scan the QR code above
Or go to your Playstore.
Download the LBOXLD application.
Open the application.
INSTALL L.BOX LD
AND ASSOCIATE IT WITH YOUR ACCOUNT
Connect L.Box LD to the sector.
Fixed yellow LED = L.Box LD under tension
Using the RJ45 network cable supplied,
connect it to your Internet box.
LED flashes blue = current connection
Fixed blue LED = L.Box LD is connected to
the Internet
INSTALL A CONNECT'LD ENERGIZER
AND ASSOCIATE IT WITH YOUR ACCOUNT
To add to your account, Click on one of the options
the Connect'LD energizer, proposed and follow the
+
push the button instructions.
Fill in the fields.
For your your password to be valid, it
must contain at least :
Check the box "Remember me"
for a quick connection without filling in at
the future your identifier and password.
Select
Note: an email containing a confirmation
link is then automatically sent to you. You
can treat it later.
To add L.Box LD, To launch the operation,
click on one of the options disconnect then reconnect
proposed and follow the L.Box LD
instructions.
To launch the operation,
disconnect and reconnect
your energizer Connect'LD
on mains.
— 24 - § EN —
• 8 characters including :
• 1 tiny
• 1 capital
• 1 figure
• 1 special character
The gateway is well
linked with your account !
HAVE YOU JUST ACQUIRED A CONNECT'LD ENERGIZER ?
For practical reasons, we suggest that you connect it
near the L.Box LD box during the association phase below.
Once successful, you can install it at the desired location.
IS YOUR CONNECT'LD ENERGIZER ALREADY IN OPERATION?
Follow the recommendations below.
DEL FLASHES BLUE =
Connection in progress with L.Box LD
FIXED BLUE DEL =
The energizer is connected to L.Box LD
Click !
Congratulations, your
account is created !
Once L.Box LD is associated,
you can add another
Connect'LD device by
+
clicking on
Your energizer Connect'LD
is well linked with your
account !