Brandson Equipment 301812 Manual De Usuario página 14

Note: For an optimal radio reception, it is recommended that the cable antenna is
completely rolled out.
12 Activating and changing the radio transmitter default settings
Enable the radio function and simultaneously press and hold the "MEM/M+/NAP"
key till "P01" appears on the display. Press the "Station forward" and "Station back"
key to select between the presets (P01 - P10). Once you have reached the desired
default setting, once again press the "MEM/M+/NAP" key to save the current sta-
tion as the default setting.
To select the saved station, press the "MEM/M+/NAP" key briefly while you are in
the radio mode and select amongst the presets.
13 Dimming the display
To dim the alarm clock display, press the "SNOOZE/SLEEP" key repeatedly in the
standby mode to select between two different level of brightnes.
14 Radio-sleep-function
If you press the "SNOOZE/SLEEP" key while listening to the radio, you can select a
sleep timer. Press the "SNOOZE/SLEEP" key repeatedly to select between a sleep
timer ranging from 90 minutes to 15 minutes. If the timer is enabled, the radio will
switch off automatically after period of time set.
15 Nap mode function
In the Standby mode, press the "MEM/M+/NAP" key to enable the nap mode func-
tion. The display now shows the set "Nap" time (N90-N10). You can select between
N90 (90 minutes) and N10 (10 minutes) by pressing the "MEM/M+/NAP" button
again as soon as the "Nap" time is displayed. Set "OFF" if you want to disable the
sleep timer function. 60 minutes after your set time and then switch off automat-
ically. To switch off the alarm before, press the "Alarm ON/OFF" key on the upper
side of the device.
14
English