7) When the treatment is finished, press the On/Off button
5
handpiece
.
8) Only then should you take the attachment
clean, running water.
After use
Note
►
Always empty the water tank
up of bacteria.
When the handpiece
1) Open the water tank lid
of the water.
2) Close the water tank lid
3) Point the nozzle
5
handpiece
6
water tank
.
4) Remove the attachment
the charging station
5) Place the handpiece
Cleaning and maintenance
DANGER!
►
Always unplug the charging station
There is a risk of electric shock!
Never immerse the handpiece
ATTENTION!
►
Never open the housing of the charging station
cannot be resealed in a watertight manner.
►
Do not use abrasive, aggressive or chemical cleaning agents. They could damage
the outer surfaces of the appliance.
♦
Clean the charging station
detergents or solvents. They can damage the plastic surfaces.
♦
Remove the attachment
thoroughly under running water.
NMD 3.7 C8
6
and all tubes after every use to prevent the build-
5
is switched off and you have finished the treatment:
7
with the attachment
7
.
1
of the attachment
on for a couple of seconds to flush any remaining water from the
2
from the handpiece
q
.
5
on the charging station
q
5
or charging station
q
only with a soft, lightly moistened cloth. Do not use
2
from the handpiece
u
2
out of your mouth and rinse it under
2
still fitted and pour out the rest
2
downwards into a washbasin. Switch the
5
and place it in the holder
q
.
from the power socket before cleaning.
q
in water or other liquids!
q
or the handpiece
5
. After use, clean the attachments
to switch off the
9
on
5
! They
2
GB │ IE
│
13
■