Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may
Save all warnings and instructions for future reference.
The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
•
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
ELECTRICAL SAFETY
• A battery-operated tool with integral batteries or a separate battery pack must be recharged
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
•
• If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
• Use only Kobalt 80-volt batteries. (KB 280-06, KB 2580-06, KB 380-06, KB 280C-06, KB 2580C-06,
KB 380C-06）
• Use only Kobalt 80-volt chargers. (KRC 30-06, KRC 80-06,KRC 0280-06)
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when operating a power tool.
medication. A moment of inattention while operating power tools may result in serious personal
injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as
a dust mask, non-skid safety shoes, a hard hat, or hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of
the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust-related hazards.
A charger that may be suitable for one type of
Use of any other batteries may
7
Publicidad
