Dynex DX-32L200A12 Manual De Instrucciones página 7

Alignment instructions
Test equipment
VG-848 (YPbPr, VGA signal generator)
VG-849 (HDMI signal generator)
CA210 (color analyzer)
1 Alignment flow
1.1 Voltage of power supply test
According to the wiring diagram specified by product specification, connect all the
boards correctly; then power on and press key "standby" to turn on the TV.
1.1.1 For models of LC-32/37/42/46MS70
a) Test the pin voltage of socket X508 on power board, the value is listed in Table 1.
Pin 1
Min.(V) 4.85
Typical(V) 5.00
Max.(V) 5.35
b) Test the pin voltage of socket X503 on power board, the value is listed in Table 2.
Pin
Min.(V)
Typical(V)
Max.(V)
1.1.2 For models of LE-19/22/24MS75
Test the pin voltage of socket X502 on power board, the value is listed in Table 3.
Pin 1, 2
Min(V) 11.3
Typical(V) 12.0
Max(V) 12.6
Aligment Instructions
Table 1 Voltage of socket X508
2 3 4
3.25 4.85 4.85
3.30 5.00 5.00
3.30 5.35 5.35
Table 2 Voltage of socket X503
1~5 6~10
23.8
24.0
25.2
Table 3 Voltage of socket X502
3, 4 5 6, 7, 8
0 11.3 0
0 12.0 0
0 12.6 0
5 6, 7 8, 9
2.85 0 11.3
3.00 0 12.0
3.15 0 12.6
11
0 3.25
0 3.30
0 3.30
9 10
2.85 4.85
3.00 5.0
3.15 5.35
10, 11 12, 13
0 23.8
0 24.0
0 25.2
12
4.85
5.0
5.35
11 12 13
4.85 3.25 4.85
5.00 3.30 5.00
5.35 3.30 5.35