Installing the Batteries
Remove the battery cover from the remote control and put 2XAAA
size batteries inside the compartment.The diagram inside the
battery compartment shows the correct way to install
the batteries.
1.Open the cover
Using the Remote Control
To use the remote control, point it towards the front of the digital set
top box The remote control has a range of up to 7 metres from the
set top box at an angle of up to 60 degrees.
The remote control will not operate if its path is blocked.
Sunlight or very bright light will decrease the sensitivity
of the remote control.
2.Install batteries
3
3.Close the cover