Serenco SIN-100.1070 Instrucciones De Uso página 2

UK NL DE FR
Technical Data:
Type LED: 7W COB LED
Type LED spot: 3W SMD LED
Brightness: 60 ~ 600 Lumen
Brightness spot: 120 Lumen
Battery: 3.7 V 2.6 Ah
IP rating: IP54
IK rating: IK07
Charging time: 4 hours
Run time: 2 hours to 16 hours
Run time spot: 10 hours
Working temperature: -20 ~ 50°C
Product dimensions: 384x40x44.5 mm
Power connection:
Use the lamp within places prescribed and governed by current regulations on workplaces and electrical systems. Check that the plug
fitted on the cable is suitable for the work environment, if it is not, it must be replaced by a qualified electrician.
Main features:
• COB and SMD LED technology
• COB LEDs provide 60 ~ 600 Lumen
• Rotating dimmer switch
• Ball joint magnetic base, can be rotated 360° with a 42° tilt
• 210° Integrated swivel hook
• Low power consumption, low heat emission
• Battery charge level indicator for easy monitoring
• Lamp use is not affected by cold temperatures
• Cordless design improves safety, convenience and flexibility
• 3.7 V 2.6 Ah Li-Ion battery provides 2 - 16 and 10 hours constant light output
• Diffuser lens for softer light and reduced shadow
• IP54 rated
• IK07 rated
• Robust, shock resistant housing
• Broad 120° light spread
Instructions for use:
• Charge the battery for at least 8 hours before first use
• To charge the lamp, connect the cable via the USB-C to the lamp directly. Then connect the USB plug to either the 100 ~ 240 V
adapter (optional) or any other USB power source available
• The charge level indicator displays 5 LEDs to indicate when charging is complete
• The charge level indicator will show 1 flashing LED when charging is required, please re-charge in good time
• The work light is controlled by 2 switches. The push button controls the top light by an on or off selection. The rotary switch allows a
variable control of the lumen output by turning in a clockwise direction
• Do not leave the battery in a fully discharged condition. Recharge the lamp at least once every 30 days. Always fully charge the
battery to extend the battery lifetime. Always use the original charger
Accessories and spare parts:
USB-C cable
100 ~ 240 V charger optional (SIN-100.1070-2)
Use only accessories and spare parts approved by the manufacturer.
Caution:
• Avoid looking directly into the beam
• Do not use the lamp near open flames
• Switch off the lamp when not in use
• Only use this lamp for the purpose it is designed to, all modifications are strictly prohibited
• Should any cable be damaged, it must be immediately replaced with one of the same type
• When plugging the charger into a suitable mains supply, always check that the device is in good condition, and does not appear
damaged as this may impair safety
Warranty/Service:
• 12 months from the date of the purchase – Proof of purchase is required to make any warranty claim
• The warranty does not apply in case of damage to the device due to negligent / improper use or accidental damage
2
ES
Lumen Laser class I
Protection class III
EAN: 8717775519690
Colour temperature: 6500 K
Weight: 300 g
Technical data optional charger (SIN-100.1070-2):
Voltage: AC 100 V ~ 240 V
Frequency: 50/60 Hz
Charger output voltage: 5 V 1 A