cecotec READY WARM 800 THERMAL CONNECTED Manual De Instrucciones página 55

1. PARTS AND COMPONENTS
Fig. 1
1. Control panel
2. Power button
3. Feet
4. Panel heater
Accessories and tools
Fig. 2.
Fixing brackets
A.
Fixing plugs and screws
B.
Hooks
C.
Plugs and screws
D.
Rear-part screws
E.
Foot screws
F.
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If any of them
are missing or not in good condition, please contact the official Cecotec Technical Service
immediately.
Note
It is normal for there to be an unusual odour when switching on the appliance for the first time.
Leave the appliance running in a well-ventilated room for 2 to 3 hours.
- Unwind the power cord completely and inspect it for damage. Do not use the appliance if it
or its cord have been damaged or are not working properly.
- Make sure you have read and understood all instructions and warnings in this instruction
manual. Pay particular attention to the safety instructions on previous pages.
READY WARM 800 /1200 / 1800 / 2000 / 2500 THERMAL CONNECTED
ENGLISH
55