APETDOLA FP10 Manual página 6

5. Plug in the power, and the water dispenser
starts working again.
* It is recommended to thoroughly clean the
product at least every 14 days.
About filter element replacement
Replacement cycle of filter element
·Filter element:The recommended replacement cycle is about 1 month
1. Please purchase the original APETDOLA official water dispenser filter.
2. Soak the filter element in clean water for about 5 minutes before use (the filter element shall
be free from any oil stain and dirt),Remove old filter element from the groove of the water
retaining ring and place the soaked filter element in it.
* Note: If the water flow slows down obviously and the filter element may be blocked by dirt or
damaged, please replace the filter element in time.
For more detailed instructions, you can also visit our official website
Check out the video for more information.
Product parameters
Product name : Pet water dispenser
Model: APETDOLA FP10
Product weight: 800g
Product size: 20.3cm*19cm*15cm
Material：ABS +304 stainless steel
Water storage: 120ml
Capacity: 2L
Layer of filter element: 6 layers
Input interface: Power adapter
Input parameters：DC5V/1A
Power cord length: 1.5m
After-sale service
Thank you very much for purchasing APETDOLA products. In the process of using the products,
if you have any questions about the products, please contact us, and we will provide you with
thoughtful after-sales service.
How to contact us?
support@apetdola.com
05
MAX
MIN
www.apetdola.com