APETDOLA FS10 PRO Manual página 6

Water Level Window Light Notification
This product light notification function.
Blue Light - the product works normally.
Red Light - the water level in the tank is too low, the product will stop working. For your safety,
please add the water in time.
How to Fill Water
Unplug the power supply and pour clean and hygienic water into the water tank. The amount of
water should be limited to the specified range (above the lowest water level line and below the
highest water level line).
※It is recommended to change water at least once in �-� days.
How to Clean
�. Unplug the power supply.
�. Remove the drinking basin, water tank and other parts and rinse with clean water.
※Except for the main control module and filter tray, all other parts can be cleaned in
the dishwasher.
※The main control module cannot be rinsed with water, but can be wiped with a damp cloth.
�. Pour clean water into the water tank and reassemble for use.
※It is recommended to fully clean the product at least once every � days.
How To Clean Water Pump
�. Take out the main control parts and
separate the pump from the pump
connection tube.
�. Open the pump shell.
��