Lyambda LLT156P01 Manual De Usuario página 31

Fingerprint Reader (Option for
Model A)
Enroll your fingerprints as instructed below before use.
The fingerprint reader module uses the Sign-in options
configuration of the Windows Account.

Fingerprint Sign-In Issues
If at the Windows Hello screen, the fingerprint reader
fails to recognize the fingerprint 3 times it will then block
access to the computer. In this case you will need to use
your PIN (the PIN you used when initially setting up the
fingerprint reader) to access the computer. Alternatively
you can sign-in using your windows password. After
using the PIN code (or windows Password) to access the
computer you can go to the Settings > Accounts >
Sign-in options if you wish to change any settings.
Fingerprint Module Configuration
1. Click the Settings item in the Start Menu.
2. Click Accounts and then click Sign-in options.
3. You will need to add a Windows password
(click Add under Password).
4. After you have added the password you
will need to also add a PIN.
5. Click Set up under Fingerprint recognition
(Windows Hello).
6. The wizard will then guide you through the set up
process to enroll your fingerprints.
7. You will be instructed to Touch the fingerprint sensor a
number of times (this may be in excess of 20 times).
8. Try to present different parts of your finger in different
positions similar to the various positions you may use when
using it, and note the following:
• Hold the finger on the sensor for at least half a second.
• Make sure that you make firm direct contact with the
sensor, and cover the entire area of the sensor with the
finger (you are looking for a reading of at least 75% of the
finger area).
• Use a pressing motion as opposed to a touching or
tapping motion.
• When authenticating use the same sort of angle you used
for enrollment.
9. Click Close when complete.
10. You can choose to Add another finger (this is
recommended) or Remove the current fingerprint reading.
11. You can now touch the fingerprint sensor to log-on to the
computer.
Figure 21 - Accounts - Sign-in options
27