06Manual 18Daitsu ENG
18/12/06
To prevent injury to the user or other people and property damage, the following instructions must be followed.
Incorrect operation due to ignoring of instructions may cause harm or damage. The seriousness is classified by the following
indications.
WARNING
CAUTION
{
Meanings of symbols used in this manual are as shown below.
Connect with the power properly.
•
Otherwise, it may cause electric
shock or fire due to excess heat
generation.
Do not modify power cord length
or share the outlet with other
appliances
It may cause electric shock or fire
•
due to heat generation.
Always ensure effective earthing.
•
No earthing may cause electric
shock.
Disconnect the power if strange
sounds, smell, or smoke comes
from it.
It may cause fire and electric shock.
•
Keep firearms away.
•
It may cause fire.
Ventilate room before operating air conditioner if
there is a gas leakage from another appliance.
•
It may cause explosion, fire and, burns.
68
12:36
Página 68
SAFETY PRECAUTIONS
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to property.
Never do this.
Always do this.
WARNING
Do not operate or stop the unit by
switching on or off the power.
•
It may cause electric shock or fire
due to heat generation.
Do not operate with wet hands or
in damp environment.
It may cause electric shock.
•
Do not allow water to run into
electric parts.
•
It may cause failure of machine or
electric shock.
Do not drink water drained from
air conditioner.
It contains contaminants and could
•
make you sick.
Do not use the power cord close
to heating appliances.
•
It may cause fire and electric shock.
Do not damage or use an unspe-
cified power cord.
•
It may cause electric shock or fire.
Do not direct airflow at room
occupants only.
This could damage your health.
•
Always install circuit breaker and
a dedicated power circuit.
•
No installation may cause fire and
electric shock.
Do not open the unit during ope-
ration.
It may cause electric shock.
•
Do not use the power cord near
flammable gas or combustibles,
such as gasoline, benzene, thin-
ner, etc.
•
It may cause an explosion or fire.
Do not disassemble or modify unit.
•
It may cause failure and electric shock.