Rosthal DRO128-9FINS Manual De Instrucciones página 11

CALEFACTOR DE ACEITE
DRO128-9 Paneles
DRO128-9 fins oil heater
Note: If the temperature is not set, the heater will run continuously.
Note: If running at the lower end, heaters will not provide high heat output like high-grade opera-
tions, but the lower end does not require much current to run. In order to avoid circuit overload, do
not connect the machine to a circuit that already has other electrical appliances working.
TEMPERATURE SETTING
1, when the machine enters the heating state, you can directly use the "+" and "-'' buttons to set the
required temperature, setting the range from 13°C to 30°C.
2. When room temperature reaches set temperature.
3. When the room temperature is lower than the set temperature, the heater is turned on again.
TIMER SETTINGS(AUTO OFF)
Note: This feature is only used if you need a heater to run for a period of time(set to 1 to 24 hours)
and automatically turn off.
Note: Set the temperature before setting the timer to turn off automatically so that the heater can
turn off the heating function when it reaches your desired temperature.
1. Press the "MODE" button until the timer icon flashes, the screen display will appear in hours, and
the automatically close icon will appear.
2. Use the "+" and "-'' buttons to set the heating run time(set to 1 to 24 hours). Once the timer icon
stops flashing, the timer automatically shuts down.
3. When the set time is over, the heat will automatically turn off.
Note: If the temperature is set before the timer is automatically shut down, the heater will run on
and off according to the setting temperature until the timer is automatically shut down(the default
initial value of the automatic closing time is 10 hours).
Timer settings(automatically open)
Note: This feature is delayed and is only used if you need a heater to automatically start heating
after a period of time(setting the range from 1 to 24 hours).
Note: Set a temperature before setting the timer to automatically open, so that the heater can run
the heating function at the desired temperature when it opens automatically.
11
INSTRUCTION MANUAL