Keylock - Metz MECABLITZ 58 AF-2 digital Manual De Instrucciones

Ocultar thumbs Ver también para MECABLITZ 58 AF-2 digital:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 172
Setting procedure:
• Press the
FB
Select
appears on the display.
Standby
ML
• Select the „Standby" menu option by pressing the
Set
and
be highlighted.
• Confirm the selection of the special function by pres-
sing the
• Select the desired setting with the
tons. The setting takes effect immediately.
Standby
– When „Standby 10min" is displayed, the Auto OFF
10 min
function will be activated after 10 minutes.
Set
– When „Standby 1 min" is displayed, the Auto OFF
function will be activated after 1 minute.
– When „Standby OFF" is displayed, the Auto OFF
function is deactivated.
• Press the button
repeatedly until the screen is reset to its normal state. If
the button
is not pressed, the display is automatically reset to its normal
state after about 5 seconds.
Sel
button repeatedly until „Select"
keys. The selected menu option will
Set
button.
and

7.11 KEYLOCK

The KEYLOCK function enables the user to lock the buttons on the flash unit to
prevent them from inadvertently being pressed. When the KEYLOCK function is
activated, a symbol
Activating the KEYLOCK function:
• Press the
Sel
button repeatedly until „Select"
appears on the display.
• Select the menu option „KEYLOCK" by pressing the
and
buttons. The selected menu option will
but-
be highlighted.
• Confirm the selection of the special function by pres-
sing the
Set
button.
• Select the desired setting with the
tons.
– When „KEYLOCK YES?" is displayed, the
Key-Lock function is activated.
– When „KEYLOCK NO?" is displayed, the
Key-Lock function is deactivated.
Set
• Press the
key and confirm the setting.
Deactivating the KEYLOCK function
When a button is pressed, „UNLOCK Press these keys"
is displayed . A corresponding symbol
is displayed to indicate that the buttons are
locked. To deactivate the Key-Lock function,
press both middle buttons for about 3 seconds. The display is reset to its normal
state when the KEYLOCK function is deactivated.
appears on the display above three buttons.
Select
and
but-
TTL
12 m
ML
KEYLOCK
Zoom Ext
Set
KEYLOCK?
YES
Set
F 5.6
AZoom 35
ISO 200
125

Publicidad

Tabla de contenido
loading

Tabla de contenido