Caution : Do not loosen the locking lever during use.
Brake adjustment
•
For correct adjustment, the brake mechanism, when not in use, must
not touch the wheel, but the gap must not exceed 3mm. Always test
the rollator after adjusting the brakes.
•
If the adjustment does not apply the brakes, do not use the rollator.
Contact an authorized dealer.
•
To apply the brake (reduce the gap between the wheel and the brake),
turn the adjusting nut clockwise.
•
To release the brake (increase the distance between the wheel and
the brake), turn the adjusting nut counterclockwise.
CARE AND MAINTENANCE
Failure to care for and monitor your product may result in the risk
of serious injury.
•
Clean the rollator regularly with warm water and a soft cloth. Do not
use abrasive products, detergents or solvents.
•
Dry with a clean, dry soft cloth.
•
Make sure there is no accumulation of dirt or debris around the axle,
brakes or wheels.
•
Do not use cleaning products containing phenol or chlorine, as this
could damage aluminium and polyamide materials.
•
Lubricate the wheels with a little oil if they squeak.
•
Periodically check the wear and strength of all screws and bolts.
•
Replace all broken, damaged or worn parts immediately.
•
Check that the brakes are working before each use.
•
Check the parking brakes by pushing the handles into the locked
position, then trying to push the rollator.
•
If there is a malfunction, do not repair the rollator yourself. Consult an
authorized distributor.
•
Check weekly the clip and knob for height adjustment and the seat
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in
accordance with hygiene instructions. When transferring the rollator,
remember to hand over all the necessary technical documents to the
new user. Beforehand, the product must be inspected by an authorised
specialist.
RECYCLING
When the product has become unusable and you have to throw it away:
please contact your specialist dealer. If you wish to carry out recycling
for yourself, ask your local waste management company for disposal
guidelines.
DMI-F-10_Annexe 2_Notice.1
Mai 2023
STORAGE
Failure to observe the storage conditions may lead to deterioration
of the product and thus to the risk of serious injury.
•
Do not store your rollator for an extended period of time near a heat
source or in the sun (e.g. behind a window or near a radiator) or near
a cold source.
•
Keep away from all flames and sources of sparks.
•
Observe the conditions for storing and stowing your rollators :
- In a dry and temperate place
- Protect your rollator by packaging it from dust, corrosion
(e.g.abrasive elements, sand, sea water, salty air).
- Store all removed parts together in the same place (or locate them
if necessary) to avoid mixing them with other products when
reassembling.
- All components must be stored without any load (do not place any
objects that are too heavy on the rollator elements, do not jam
anything...)
TECHNICAL SPECIFICATIONS
Overall dimensions
Passage width
Handle height
Seating dimensions
Wheel diameter
Colour
Aluminium structure
Weight
Maximum load
PERIOD OF USE
The expected life span of this product is 5 years under normal use, safety
and maintenance conditions. Beyond this period, the product can be used
for as long as it is still in good condition.
WARRANTY
This product is guaranteed for two years from the date of purchase by
the user. IDENTITIES will provide replacement parts for any part that
has broken due to a manufacturing, design or material defect. Contact
the distributor from whom you purchased the product in case you need
to make a claim. Failures resulting from accidental damage, misuse,
alteration, or wear and tear are not covered by this warranty. Contact the
dealer from whom you purchased the product to apply the warranty.
Width 62 x Length 68 cm x height 80 to
95 cm in 7 indexed positions
44 cm
82 to 97.7 cm
Width 44 x depth 23 x height 55 cm
25cm in front and 20cm at the back
Pearl White, Champagne and Grey
7.9 kg with bag
136 kg
Page 7 sur 11