Hydor KORALIA Magnum Serie Manual página 7

GB
Dear Hobbyist,
All manuals and user guides at all-guides.com
we thank You for choosing a KORALIA Magnum pump.
Please read the following instructions very carefully for best
understanding of the characteristics of this new, unique and
innovative product.
INTRODUCTION
KORALIA Magnum is a new innovative range of circulation
pumps for aquariums. The exclusive Hydor design and technology
guarantee a continuous and powerful water flow which can be
directed freely thanks to the special sphere shaped connection
to the exclusive combination suction cup + magnet support.
High performance,low energy consumption, quick and easy
maintenance. The combination suction cup + magnet can safely
hold KORALIAs applied in tanks with glass (or acrylic) form 12
to 20 mm thick (from 0.5 to 0.8 in).
KORALIA Magnum 5 - 6 - 7 - 8 are the new point of
reference for quality and reliability thanks to the unique features:
Technical characteristics of the materials used for the
components
New auto-lubricating rotor technology without shaft
Amazing low power absorption
Quick and easy maintenance
Exclusive electronic system to guarantee unidirectional start-
up with AHS function
What is AHS?
AHS - Anti-Heating System guarantees extra safety. This system
automatically detects if the impeller is blocked (this could happen
in particularly hard working conditions) and after 3 start-up
attempts cuts the power supply to the pump preventing the motor
from overheating dangerously (thus heating also the aquarium) or
damaging the internal circuits.
NOTE: should the AHS activate, to restart the pump, simply
unplug it from the electrical supply, check the cause of the
impellor blocking, carryout maintenance as described in the
appropriate paragraph and then plug it back in.
DESCRIPTION -Fig. 1-
A Upper chamber
B Impeller
C Bearings + OR
D Pump body
E Internal suction cup + magnet support (with rotation sphere)
F External suction cup + magnet support
ATTENTION!!! KORALIA pumps are specially designed for use
in aquariums and tanks for water movement. It is not a filtration
pump. Please refer to your dealer for any other application.
SAFETY INFORMATION
Attention: please verify that all components of the pump are
undamaged before putting it into function. Before any kind of
intervention, ALWAYS disconnect electrical supply of the pump
and any other appliance placed in the water. Be sure that the
voltage of the mains supply corresponds to the voltage shown on
the unit's label.
The pump is intended for indoor use only in fl uid with a
temperature of max. 35° C (95° F).
DO NOT RUN DRY - Do not connect to electrical supply if pump
is not completely immersed in water.
Do not connect to electrical supply if pump is missing parts.