JVC KW-AVX820 Manual De Instrucciones página 17

Menu item
D. (Digital) Audio
Output * 7
Down Mix * 7
D. (Dynamic)
Range Compres.
(Compression) *
IF Band Width
Area Setting
Sirius ID * 9
* 9
Appears only when a SIRIUS Satellite Radio is connected.
Select the signal format emitted through the DIGITAL OUT (optical) terminal.
( 58)
♦
PCM
♦
Dolby D
♦
Stream
When playing back a multi-channel disc, this setting affects the signals
reproduced through the LINE OUT terminals.
♦
Dolby Surr.
♦
Stereo
You can enjoy a powerful sound at a low volume level while playing Dolby
Digital software.
♦
7 Auto
♦
On
♦
Auto
♦
Wide
♦
US
♦
Europe
♦
SA
Your SIRIUS identification number appears on the monitor.
Selectable setting/item
: Select this when connecting an amplifier or a decoder
incompatible with Dolby Digital or MPEG Audio, or when
connecting to a recording device.
: Select this when connecting an amplifier or a decoder
compatible with Dolby Digital.
: Select this when connecting an amplifier or a decoder
compatible with Dolby Digital or MPEG Audio.
: Select this to enjoy multi-channel surround audio
by connecting an amplifier compatible with Dolby
Surround.
: Normally select this.
: Select to apply the effect to multi-channel encoded
software.
: Select to always use this function.
: Increases the tuner selectivity to reduce interference
noises between adjacent stations. (Stereo effect may be
lost.)
: Subject to the interference from adjacent stations, but
sound quality will not be degraded and the stereo effect
will remain.
: When using in North/Central/South America. FM/AM
intervals are set to 200 kHz/10 kHz.
: When using in any other areas. FM/AM intervals are set
to 50 kHz (100 kHz during auto search)/9 kHz.
: When using in South American countries where FM
interval is 100 kHz. AM interval is set to 10 kHz.
Continued on the next page
AV MENU 17