Hitachi RAR-5E2 Manual Del Usuario página 17

ONCE TIMER (ON/OFF TIMER) OPERATION
■
To cancel Reservation
● Point the signal window of the remote controller towards the indoor unit and press
and "ON or OFF set time" goes out with a beep and the (TIMER) lamp on the indoor unit turns off.
NOTE
●
User can set only one of the OFF-timer, ON-timer or ON/OFF-timer.
● If WEEKLY TIMER already set, by setting the ONCE TIMER, ONCE TIMER operation is prioritized. When ONCE
TIMER operation is complete, WEEKLY TIMER operation will be activated.
OFF TIMER
The device can be set to turn off at a preset time.
1. Press (OFF-TIMER) button.
2. Set the "turn-off time" with
1
3. After setting, direct the remote controller towards the indoor and press
(SEND) button.
and "set time" lights up instead of blinking.
A beep sound emitted from indoor unit and the (TIMER) lamp on the indoor
unit lights up.
ON TIMER
The device will turn on at a designated time.
1. Press (ON-TIMER) button.
2. Set the "turn-on time" with
3. After setting, direct the remote controller towards the indoor and press
(SEND) button.
and "set time" light up instead of blinking.
A beep sound emitted from indoor unit and the (TIMER) lamp on the indoor unit
lights up.
ON/OFF TIMER
●
The device will turn on (off) and off (on) at the designated time.
● The switching occurs first at the preset time that comes earlier.
● The arrow mark appears on the display to indicate the sequence of switching
operations.
1. Press (OFF-TIMER) button so that
2. Set the "turn-off" time with
controller towards the indoor and press
3. Press (ON-TIMER) button so that
The and blink.
4. Set the "turn-on" time with
5. After setting, direct the remote controller towards the indoor and press
(SEND) button
and set "turn-on" time light up instead of blinking.
A beep sound emitted from indoor unit and the (TIMER) lamp on the indoor unit
lights up.
■
The timer may be used in three ways: OFF-timer, ON-timer and ON/OFF (OFF/
ON)-timer. Set the current time first because it serves as a reference.
– 17 –
and blink on the display.
(TIME) button.
and blink on the display.
(TIME) button.
and blink on the display.
(TIME) button. After setting, direct the remote
(SEND) button.
and set "turn-off" time light up.
(TIME) button.
(CANCEL) button.