AUDIOCORE AC830 Manual Del Usuario página 6

3. AC830 and Bluetooth headset or Bluetooth speaker that
supported A2DP profile worked on other audio device (must
supports headphone cable or fiber optic cable ). AC830 and
Bluetooth headset or Bluetooth speaker could replace a wired
earphone from wired connection to wireless connection,
remove the wire limited, bring more fun for you.
AC830 connect with two device simultaneously while
working as a Bluetooth transmitter: This unit could connect
with two stereo Bluetooth speakers or Bluetooth headsets to
play music simultaneously
1. Named the two Bluetooth headsets or two Bluetooth
speakers as A and B.
2. Pairing with A,power on A and enter bluetooth pairing
mode(Usually red and blue lights flashing alternately, but some
are led light flash quickly, different from the normal state,
depending on your Bluetooth headset / speaker function
operation)
3. Long press AC830 "multi-function button" for three seconds
until the blue LED blinks quickly enter pairing search mode, if
AC830 don't automatically enters pairing mode, you can
double-click " multi-function key "(the action should be
coherent) after enter pairing mode.
4. Put AC830 and A together,waiting around 30s,you will see
AC830 blue led long light after it paired with A
successfully,connect AC830 to sound source and you can here
voice from A,power off A and AC830 after connection
successful.
5. Power on B and pairing with AC830.(following the same
pairing steps with A) power off AC830 after pairing successful.
10 I
6. Power on A (do not enter into pairing mode, but if it enters
into pairing mode, it's ok), around 10-20 seconds later (in this
case, most of the Bluetooth speaker is for automatically
connection, please wait a moment)
Then power on the AC830 (no need to enter into pairing mode),
it will search and connect with device A and B automatically,
the pairing time will take around 30 seconds. Then connect to
audio resource to check if the two devices could play
simultaneously. If not, please power off AC830, and power on
AC830 to connect with device A and B. If it does not work,
please follow the steps for two connections simultaneously
again.Please note that there is no other Bluetooth headset or
speaker enters pairing mode when you do the operation
connect with two devices.
The compatibility testing report for AC830 worked as
Bluetooth transmitter to connect with two device
simultaneously 1. Due to different Bluetooth chipset has
different function firmware setting and different operations so
some Bluetooth speaker or Bluetooth headset may have
compatible problems with AC830. When one of the devices has
no sound or discontinuous playing, please re-pair the two
devices two or three times to check if there has same situation,
then we could have a result if it is wrong in compatibility
AC830 connect with two device simultaneously while
working as a Bluetooth receiver: AC830 could connect with
two mobile phone simultaneously (but could not play music
from two mobile phone at the same time. you could choose any
mobile phone to play music, but it need to pause or end the
I 11