ADJUSTING
THE HEIGHT OF THE UPPER RACK
You can adjust the height of the upper rack in your Samsung
dishwasher
so that the lower rack can
accommodate
larger sized dishes. Depending
on where you set the upper rack height, the lower rack can
accommodate
plates up to 12 in. (30 cm) in diameter
and the upper rack can accommodated
plates up to
8 in. (20 cm)in
diameter.
t.
To lower the upper rack by 2 in. (5 cm), pull
the adjust handles located at the left and
right sides of the upper rack, and then push
the upper rack downwards
slightly at the
same time.
2.
To raise the upper rack, just pull the upper
rack upwards.
The adjuster
handle will latch
.....
and the upper rack will move to the high
_:::-
position.
A
We recommend
adjusting
the height of
.......
_
the upper rack before loading
dishes into
the rack. If you adjust the the rack after
loading the dishes, you may damage
the
dishes. If you do not adjust with left and right handle together,
the dishwasher
door may not close
properly.
Pull out the upper rack from the tub until it is fully revealed before adjusting
the upper rack.
LOADING
THE LOWER RACK
Load cookware
(pots, pans, etc.), up to 12 in. (30 cm) in diameter
into the lower rack. The lower rack has
been especially
designed
for dinner dishes, soup bowls, plates, pots, lids, and casserole
dishes.
Load your plates into the center column
of the rack so that their top sides face each other. Load large items
such as pans and pots into the dishwasher
so their inner cavities face downwards.
We recommend
loading
cups, stemware,
and small plates into the upper rack.
See the recommended
loading patterns
below.
8 place
setting
10 place
setting
t2 place setting
English o 16