Ferm TBA1002 Traducción Del Manual Original página 6

DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-4.
1. Multi purpose brush head
2. Telescopic pole with ball valve
3. Soap dispenser
4. Ball valve
3. ASSEMBLY
Assembly Pole (Fig. 2)
1. The waterhose is already installed in the pole,
don't take this waterhose out of the tube.
2. Open the clamps by turning them.
3. Slide the clamp upwards so there is space to
place the following pole into the connector
4. Fasten the clamp by turning it.
5. Repeat this step for every pole.
Connecting the brush to the pole (Fig. 2)
1. Slide the plastic holder onto the adapter.
2. Move the rotary knob upwards and fasten it by
turning.
3. Connect the hoses of the brush to the
connector of the telescopic pole.
Connecting the soap dispenser (Fig. 4)
1. Connect the soap dispenser directly to the tap
using universal couplings.
2. Connect the water hose with ball valve with
an universal garden hose coupling to the male
coupling of the soap dispenser.
3. Open the soap dispenser by unscrewing the
cap of the dispenser. Fill the dispenser with
a suitable soap, then close the soap dispenser.
4. With the adjustable knob (fig 5) you can
regulate between soap and water. The soap
dispenser will be always filled. When the soap
is used, the contents become light in color and
soap must be added again.
4. OPERATION
Ready for use (Fig. 3)
Risk of injury! Ensure that all components
are undamaged and have been
assembled securely. Incomplete
assembly may result in personal injury.
6
Keep the product out of the way of
children and other unauthorized
persons..
• Extend the telescopic pole to the required
working length. To retract or extend, use
the thinnest part of the pole first, then slide
the thicker part in or out. Be careful when
retracting the telescopic pole, ensure that the
water hose cannot kink inside the pole.
Do not turn the segments! Only slide in
and out straight.
1. When not using the soap dispenser, connect
the ball valve (4) to a universal garden hose
coupling.
2. Open the water tap and slide the handle on the
ball valve (Fig 4) to the left.
3. Clean solar panels when it rains or osmosis
water (purified water without lime, nitrates and
salt). This water rinses the panels which means
there will be less limescale on the panels
compared to tap water.
When cleaning solar panels turn off the
solar panels fully. Avoid contact with
cables.
4. Never drag the ball valve or the soap dispenser
over the floor.
5. CLEANING & MAINTENANCE
Protect the product against frost.
• Store the wash brush in a dry and frost-free
environment. Keep the brush head off the
ground.
Do not store in direct sunlight. This will ensure
that the brush hairs will stay intact.
• Clean the telescopic pole with a slightly damp,
lint-free cloth before retracting the telescopic
pole. This prevents scratches.
• The screws in the closure clips can be
tightened or loosened using an Allen key. Do
not tighten the screws too tight, this may result
in damage to the closure clips.