Corsair AF120 RGB SLIM Manual Del Usuario página 4

FAN INSTALLATION
4 CONNECT FAN TO RGB CONTROLLER
Connect the 4-pin RGB connectors from your
AF120 RGB SLIM fans into the Lighting Node
CORE controller in sequential order from port
#1 to #6.
6 CONNECT TO POWER
ENGLISH
5 6 CONNECT LIGHTING NODE CORE TO PC
Plug the 9-pin USB cable from the Lighting
Node CORE into an available internal USB
2.0 header on your motherboard or USB hub.
Connect the SATA power connector to an
available SATA connector from your power
supply.
Connect the 4-pin PWM connector into an
available 3-pin* or 4-pin (recommended, if
available) fan header on your motherboard or
fan controller.
You can use fan splitter cables (sold separately)
if your motherboard or fan controller does not
have enough fan headers.
*Connecting the 4-pin PWM connector into a
3-pin fan header will cause your AF120 RGB
SLIM to spin at full speed.
2