HOW TO USE YOUR HAPPYHOT
HEATED GLOVES
1
Charge the batteries until the
charger light turns green. The
charging time of an empty battery
is usually between 4-6 hours.
Carefully connect the fully charged
2
batteries to the gloves. Place the battery in
batteries to the gloves. Place the battery in
the pocket so that the connector goes along
the pocket so that the connector goes along
the arm, not across. Never fold the battery in
the arm, not across. Never fold the battery in
the middle.
Activate/deactivate the gloves by pressing
Activate/deactivate the gloves by pressing
3
the "ON/OFF" button for at least 3
seconds.
4
Select the desired heat level by pressing the
Select the desired heat level by pressing the
button 1 time quickly.
The colour of the button indicates the selected level of heat:
5
The 4 lines of LED-lights on the button indicate how much battery is le .
6
7
A er 10 seconds, the light in the ring on the ON/OFF button will turn o and only
the fl ame will light up to indicate the gloves are still turned on. The light in the ring
will turn back on a er you press 1 time on the button.
8
Put the gloves on and o with care in order to prevent any damage to the heating
system.
You can use the supplied extension cables if you want to place the battery
9
somewhere else other than in the pocket on the gloves.
appyHot_gloveliners_brugermanual_juni23.indd 9
appyHot_gloveliners_brugermanual_juni23.indd 9
= Low heat
=
=
= Medium heat
=
3 sec
ON/OFF
1 x
TEMP
= High heat
=
9
01.07.2023 11.03
01.07.2023 11.03