Publicidad
Idiomas disponibles
Idiomas disponibles
Parts & Features
See figures below for reference
I Tank Pressure Gauge
indicates
the reserve air pressure in the tank.
|
__J
I Pressure Switch
1
This controls the power to the motor and
also the cut-in/cut-out
pressure settings.
This switch serves as the Auto-On/Off
positions
for the unit.
Tank Safety Valve
Used to allow excess tank pressure
to escape into the atmosphere.
This
valve should only open when the
tank pressure is above the maximum
rated pressure.
Pressure Relief Valve
The pressure relief valve located on the side of the
pressure switch, is designed
to automatically
release
compressed
air when the air compressor
reaches
cut-out
pressure. The released air should only
escape momentarily
and the valve should then close.
I Air Intake Filter
Provides clean air to the pump and must t
always be kept free of debris. Check on |
a daily basis or before each use.
)
Pressure
Outlet Tube
Relief Tube
Quick Connect
Offers a quick release feature for
attaching
and removing
the air hose.
Regulator
Gauge
Indicates the outgoing
air
pressure to the tool and is
controlled
by the regulator.
Regulator
The air pressure coming from the
air tank is controlled
by the
regulator. To increase the
pressure turn the knob clockwise
and to decrease the pressure turn
the knob counterclockwise.
I Tank Drain Valve
*]
Used to drain condensation
from the|
air tank. Located at bottom of tank. J
Publicidad
