Jasco Z-Wave 46563 Manual De Instrucciones

46563 PRODUCT SPECIFICATIONS
Jasco Z - Wave In-wall
Toggle Smart Switch
New blue LED
backlit toggle
QUICKFIT
™
SIMPLEWIRE
™
www.byjasco.com
Specifications
Power: 120VAC, 60Hz Signal Frequency: 908.4/916MHz
Maximum Load: 960W Incandescent,
1/2 HP Motor 1800W (15A Resistive)
Range: Up to 150 feet from controller or closest Z-Wave device
Operating Temperature: 32-104° F (0-40° C)
Warranty: 5-year limited product warranty
Requires neutral wire. Switch must be mounted indoors
Design Features
· QuickFit™ – Improved components
reduce the housing depth by up to
20 percent compared to previous
Z-Wave models and eliminated the
need for heat tabs
· SimpleWire™ – Auto line-load
sensing terminals support fast
installation by detecting line and
load wires and configuring the
switch accordingly
Dual ground ports, which are offset
to avoid switch box mounting
screws, support daisy-chaining in
multi-switch setups
· Turn the connected device
On/Off manually or via Z-Wave
hub or controller
· New blue LED backlit toggle
(with 4 adjustable settings)
· Remotely monitor with any
mobile device *
· Works with Google and Alexa
(requires compatible hub
*)
· May be used in single pole
installation or with up to four
Jasco model 46561 Add-on
switches in 3, 4, 5 or 6-way
wiring configurations
· Works with all LED, CFL,
halogen and incandescent bulbs
· Can be Included in multiple
Groups and Scenes
· Utilizes the Z-Wave Firmware
Update Meta Data command
class for standardized firmware
updates Over the Air
* Requires Z-Wave hub or controller, functions may vary depending on brand.
· Supports Advanced Configuration;
Alternate exclusion, LED status
· Screw Terminal installation; requires
wiring connections for Line (Hot),
Load, Neutral, and Ground. Traveler
wire required for multi pole installation
· Uses a standard toggle wall plate
(wall plate not included)
· LED status can be inverted manually
changed to invert, always OFF and
always ON
· Inline traveler circuit protection
· Z-Wave Plus Certified
Z-Wave Plus with S2 Security
and SmartStart Features
·
Improved battery life and up to 50
percent greater wireless range
· QR codes with unique,
industry-standard secure key
exchange to add a layer of
128-bit encryption
· Effortless device pairing to Z-Wave
S2 and SmartStart certified gateways
· Backward compatible with all
generations of Z-Wave devices
· 250% faster processor
· 400% more memory
· 50% more energy efficient
· Supports wireless upgrades
to future-proof your home
· Supports wireless upgrades
to future-proof your home
1