Hisense babysense V24R-1 Manual De Usuario página 6

4.2 Turning ON the Parent Unit
* Only use the AC adapter included in this package.
* The parent unit is supplied with a pre-installed rechargeable Li-ion battery (3.7V 950mAh).
Whenever possible, connect the Parent Unit to the adapter plugged into the mains, in order to keep
the battery charged.
• Connect the adapter plug into the DC-jack on the right side of the Parent Unit.
• Plug the AC adapter into the wall outlet.
• Press and hold the power key on the top left of the keypad of the Parent Unit.
• Once the Parent Unit is turned on, the power LED will light up and "Babysense Video" image will
display on the LCD.
4.3 Charging the Parent Unit
• Connect the power adapter to the Parent Unit;
• Plug the adapter into the wall outlet.
• Charging LED on the Parent Unit will light in RED.
• When unit is turned on, the charging LED will light in RED and battery charging icon (changing bars)
will appear at the top right corner of the LCD screen.
• It takes approximately 8 hours to fully charge the battery.
• Full battery indicator (4 fixed bars) will appear at the top right corner of the LCD screen, indicating
the battery is fully charged.
Note: Before the first use or after a long product storage, it is recommended to fully
charge the Parent Unit battery prior to operating the monitor.
5. OSD (On-Screen-Display) mode operation
5.1 Parent Unit Screen ON/OFF (Audio only mode)
• Press the POWER button (1) to turn the LCD screen ON/OFF.
5.2 Volume adjustment
• Press the UP button (7) to increase the volume.
• Press the DOWN button (9) to decrease the volume.
10
5.3 Brightness adjustment
• Press the LEFT button (11) to decrease the brightness.
• Press the RIGHT button (12) to increase the brightness.
5.4 Scan Mode - Automatic switching between the paired Baby Units
NOTE: This function is only available when two or more cameras are paired.
You can set the SCAN (loop) mode and each paired Baby Unit will be displayed on the screen for 10
seconds and then the screen will automatically change to the next paired Baby Unit.
• Press and hold the CAMERA SWITCH button (13) to activate the automatic SCAN mode. A loop sign
will appear next to the camera number on the top of LCD screen.
• Press the CAMERA SWITCH button (13) to deactivate the Scan mode and switch manually to the
next paired Baby Unit.
5.5 Digital zoom & Pan / Tilt
• Press and hold OK/ZOOM button (6) for approx. 2 seconds to operate Zoom in/out.
• At the Zoom mode, press the LEFT button (11) RIGHT button (12) UP button (7) and DOWN (9) button
to Pan/Tilt the image.
• During Digital Zoom mode, the zoom icon will be displayed on top of the LCD screen.
Note: To adjust Volume/Brightness, first exit the Zoom mode before operating it.
5.6 Talk To Baby
• Press and hold the TALK button (5) on the Parent Unit to talk to your baby or partner in the baby's
room via Baby Unit.
• A microphone icon will be displayed on the bottom of the LCD screen while this function is in use.
• Release the button when you are finished talking.
Note: While the "Talk To Baby" function is in use, there is no possibility to hear the
sounds from the Baby Unit. Releasing the talk key, allows hearing the sounds from
the baby's room again.
11