Descargar Imprimir esta página

Getac MB800 Guia Del Usuario página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

4. For each battery pack inserted, the correspond-
ing FULL indicator will light up in green to
show the charging progress. Starting from
the bottom bar, one green bar represents
20% charge. When fully charged, only the
highest bar glows.
When multiple battery packs are inserted,
they are charged in parallel.
Troubleshooting
If the bottom bar of a FULL indicator flashes
red, it means there is an overheating problem
with the particular battery bay and charging
for this bay is stopped. In this case, check if
any ventilation openings are blocked. Discon-
nect the power cord and wait for the charger
to cool down. If the problem persists, please
contact Getac service center for repair.
If the bottom bar of a FULL indicator flashes
amber, it means the battery pack in the par-
ticular battery bay has a problem and charging
for this bay is stopped. Check if the battery
pack is abnormal.
Safety Instructions
If a ground/earth pin attachment plug on the
AC power cord is provided, always plug the
cord into a grounded/earthed outlet. Do not
disable ground/earth pin of the plug/cord.
Avoid placing the charger in a location subject
to high humidity, extreme temperatures, me-
chanical vibration, or heavy dust.
Do not cover or block any ventilation openings
on the charger. For example, do not place the
charger on a bed, sofa, rug, or other similar
surface. Otherwise, overheating may occur
that results in damage to the charger.
Do not place the product on an unsteady sur-
face.
To avoid hastening the deterioration of the
battery pack thereby prolonging its useful
life, minimize the number of times you charge
it so as not to frequently increase its internal
temperature.
The charger will stop charging when input
voltage from the AC power line is unstable.
Avoid touching any connectors.
Avoid exposing the charger to water or an
electric shock may occur.
Disconnect the power cord from the charger
when not in use. When the charger is con-
2
FULL
nected with AC power, it is still in standby
mode even if the battery is fully charged.
The AC adapter is designed for use with your
battery charger. Connecting the AC adapter
to another device can damage the adapter
or device.
Related documents (including this one) are
available at the Getac website:
https://support.getac.com/Portal/Page/809
Regulatory Information
Europe
Getac hereby declares that this pro-
duct complies with the EU Directive
2014/30/EU and 2014/35/EU. The full
text of the EU declaration of conform-
ity is available at:
https://support.getac.com/Portal/Page/809
Warning: This is a Class A product. In a domestic
environment this product may cause radio inter-
ference in which case the user may be required
to take adequate measures.
Company name Getac Technology GmbH.
Kanzlerstrasse 4
Address
40472 Dusseldorf, Germany
Phone
+49 (0) 211-984819-0
EU RoHS
Getac products meet the requirements of
Directive 2011/65/EU on the restriction of the
use of certain hazardous substances in electrical
and electronic equipment. For more information
about RoHS, go to:
https://www.getac.com/us/environment/
Waste Electrical and Electronic Equipment (WEEE)
This symbol means that according to local laws
and regulations your product shall be disposed of
separately from household waste. When this pro-
duct reaches its end of life, take it to a collection
point designated by local authorities. Proper re-
cycling of your product will protect human health
and the environment.
Company name Getac UK Ltd.
Getac House, Stafford Park 12,
Address
Telford, Shropshire, TF3 3BJ, UK
Phone
+44 (0) 1952-207-222

Publicidad

loading

Productos relacionados para Getac MB800