Belkin GoStudio Manual Del Usuario página 15

oVeRVIeW
seCTions
Table of Contents
H
GoStudio
1 2
G
f
3 4
Input/output Description
The low cut filter basically filters out very low-frequency signals
(below 120Hz). This feature is useful if you find that certain sounds
Low Cut Filter
f
are degrading your recordings, such as air-conditioning systems,
vibrations, nearby delivery trucks, or a number of other things.
The mono switch mixes the incoming stereo signal down to a mono
mix.
This is useful when you are using the combo jacks to record audio from
two different sources, but you don't want the two sources to appear
only on the left and right stereo channels individually (see the "Combo
G Mono Switch
Jacks" description in the "GoStudio Inputs and Outputs" table above).
This is also useful when recording from only one combo jack source,
and you don't want the audio to only appear in the left or right channel.
The monitor volume control sets the volume of the playback from the
H Monitor Volume
GoStudio through the headphone output jack or the built-in speaker.
13
5 6