JVC VideoMovie GR-C7 Manual De Instrucciones página 24

25
| ANTENNA IN
$ To AV OUT connector
4 Remove the aerial cable from the TV receiver.
Connect the aerial cable to the ANTENNA IN
terminal of the RF unit.
Connect the RF OUT terminal of the. RF unit
to the aerial terminal of the TV receiver using
the provided aerial cable.
On
=
PRECAUTIONS FOR RF-P1E
@For exclusive use with the GR-C7E VideoMovie.
@Do not disassemble or remodel the RF-P1E.
®Do not expose it to strong shocks.
@Unpiug the connected equipment during
lightning storms. (Never touch the aerial cable.)
TV
receiver
Aerial! cable
(provided)
To aerial terminal
Connect the VIDEO/AUDIO INPUT cable of
the RF unit to the AV OUT connector of the
JVG yy.
VIDEO/AUDIO INPUT
Adjust the RF converter output channel
according to your VIDEO CHANNEL.
Remove
the cover
Rear view
@RE converter channel adjustment screw
The RF unit permits playback of video and audio
recordings through a TV receiver. The signals from
the RF unit are viewed through a vacant channel
not used for broadcasting in your area. The output
frequency of the RF converter has been set to
correspond to a broadcast on UHF channel 36. To
view playback pictures from the GR-C7E with
your TV receiver, tune its specified AV channel to
UHF channel 36. If channel 36 is employed for