Installation (continued)
6
Attaching the quick connector
to the receiving block
□
Connect the quick connector (P) with the green
tag to the receiving blocks (1) with a matching
green tag. Push the quick connector (J) with
the blue tag rmly upward and attach it to the
receiving block (2) with a matching blue tag.
Pull down moderately to ensure the connection
has been made.
1
Green
P
2
Blue
J
Green
7
Installing the weight
□
Install the weight clip (R) at the point of the
hose marking "weight here".
□
Insert the weight (Q) onto the clip (R) by sliding
it down onto the clip (R).
6
Q
R
R
Q