Fody Tempus Pro E41 Manual De Usuario página 7

A / Tempus Pro E41/A41 C / Tempus Pro E41/A41
(ODYS USER MANUAL DIS USER MANUAL
SENSORS SENSORS e GRAPHS
Barometer Wind gauge
E 1. Pressure measurement 1. Wind measurement EI
Absolute barometric pressure is measured by the main console. Wind speed, wind gust, wind direction & Beaufort scale is measured with the anemometer and the wind vane in the
2. Weather forecast multi-sensor pickup.
Weather condition of the next 8-12 hours is predicted using the barometric pressure. 2. Display measures
Fluctuations in barometric pressure are usually an indication of weather conditions. A rise in pressure usually means Your dashboard displays average wind speed during the hour centered in the compass and the wind direction
improving weather while falling pressure may reflect impending inclement weather. pointed on the compass.
Next to the compass is the current wind gust: maximum is indicated in duplex white. Beaufort scale is indicated in
green under the wind gust.
* Beaufort scale is an international scale of wind velocities from O (calm) to 12 (Hurricane force).
Hygrometer
1. Relative humidity measurement
Relative humidity is measured by both main console and child sensor.
2. Maximum and minimum
When you slide the dashboard up or down, minimum and maximum relative humidities will appear below the current
relative humidity: maximum is indicated in duplex white and minimum in white ash numbers.
Maximum and minimum relative humidities are the highest and lowest relative humidities measured during the last
24 hours.
Navigating from dashboard to graph
Rain gauge Slide the dashboard down, the historical data is displayed at the bottom in line channel 4
1. Rainfall measurement chart format. Or you can tap on each channel to navigate to the corresponding
Rainfall is measured with a self-emptying rain collection cup with tipping bucket rain gauge in the multi-sensor graph page. on
pickup. Water makes the bucket tip, and the number of tips is counted through a magnet placed inside the bucket. Each point on the graph represents the average value in an hour. You can tap on =
2. Display measures a point to read the average, highest and lowest values of the hour.
Your dashboard displays cumulative rainfall during the hour / day / week / month / year. E
To change the setting, repeat the unit setting procedures at P8. €
3. Setup and precaution 20 FEB | 21 FEB
The rain gauge should be placed horizontally, if possible between 0,5 to 1,5m (2 to 5 feet) high and 3 m away from À i o
surrounding obstacles.
P10 P11