Publicidad
Idiomas disponibles
Idiomas disponibles
※ Foot pedal installation
1.Pass the wire of right foot
pedal through the body, and
connect it to the power
connector.
2
2
1
1
※ Steering wheel installation
1.Press the end of the steering
axle with your hand, and then
insert the steering wheel as
shown.
08
Head
direction
2.Snap the right foot pedal
into the car body.
3.Turn the body over, ①Fix the
bottom of the body and the pedal
with 4*12mm flat head screws. ②
Fix the side and the pedal, and
install the left foot pedal
according to steps 2 and 3.
# 2 screw
2.Lock the steering wheel with
# 2 screw.
※ Anti-rollover piece installation
※ Backrest installation
※ Digging arm installation
# 4 screw
1.Insert the left & right arm
linkages into the opposite hole
of the arm body, and fix it
with # 4 screw.
Insert the anti-rollover piece into
the rear slot, and tighten it with
4*12mm round head screw.
Insert the backrest into the slot as
shown.
2.Align the slots of the bucket
and left & right arm linkages,
and then tighten.
3.Snap the arm manipulator 2
into the arm body slot as
shown.
09
Publicidad
