Urbanbiker Dakota Manual De Instrucciones página 18

1- HANDLEBAR
EN
(1)Unscrew the part anchored by four points, once removed insert the hand-
lebar adjusting it to the measure (2) and finally screw the part that has been
removed in the first step again. (3)
2- PLACE THE FRONT WHEEL
Place the front wheel (3) into the end (4) of the fork. Make sure that the brake
disc is placed in the centre of the brake caliper (5) so that it fits correctly. Uns-
crew the spring and pass the quick-release rod through the hole. Tighten the
axle nut (2) and pull the quick-release upwards (1).