Publicidad
Idiomas disponibles
Idiomas disponibles
2. Proper use of refrigerators
2.1 Placement
30mm
10mm
10mm
Precautions before installation:
Information in the lnstruction Manual is only for reference. The physical product
may differ. Before installation and adjusting of accessories, it shall be ensured
that the refrigerator is disconnected from power.
2.2.1 Door handle installation (depending on the model)
Tools to be provided by the user
Allen
Assembly
steps:
a. Use the allen wrench to fix
screws (2) into the screw hole (1)
tightly.
b. The reverse operation is for
disassembly.
Note: the picture is only for referen-
ce. Actual configuration depends on
the physical product.
Before use, remove all packing materials, including bottom
cushions, foam pads and tapes inside of the refrigerator;
tear off the protective film on the doors and the refrigerator
body.
Keep away from heat and avoid direct sunlight. Do not
place the freezer in moist or watery places to prevent rust
or reduction of insulating effect.
Do not spray or wash the refrigerator; do not put the
refrigerator in moist places easy to be splashed with water so
as not to affect the electrical insulation properties of the
refrigerator.
The refrigerator is placed in a well-ventilated indoor place;
the ground shall be flat and sturdy.
The top space of the refrigerator shall be greater than 30cm,
and the refrigerator should be placed against a wall with a
free distance more than 10cm to facilitate heat dissipation.
wrench
9
V.2
Publicidad
