Descargar Imprimir esta página

MikroTik CRS354-48G-4S+2Q+RM Guía Rápida página 2

Publicidad

Use a Web browser or WinBox to connect to the default IP address of 192.168.88.1, with the
username:
admin
 In case IP is not available then use WinBox and connect with MAC address;
 Update the device by clicking the (Check_for_updates) button to the latest RouterOS software for this
to work the device needs to have an active Internet connection;
 To manually update the device without public IP, go to our download
page https://mikrotik.com/download;
 Choose your architecture based on your device model under (System/Resources) and download the
latest packages from a stable channel to your PC;
 Open WinBox and upload packages in the (Files) menu;
 Reboot the device;
 Set up your password to secure the device.
Safety Information:
 Before you work on any MikroTik equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents. The installer should be
familiar with network structures, terms, and concepts.
 Use only the power supply and accessories approved by the manufacturer, which can be found in the
original packaging of this product.
 This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
 This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or
hot environments.
 We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
 In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging
the power plug from the power outlet.
 This is a Class A product. In a domestic environment, this product might cause radio interference in
which case the user might be required to take adequate measures
Electric shock hazard. This equipment is to be serviced by trained personnel only
Manufacturer: Mikrotikls SIA, Unijas 2, Riga, Latvia, LV1039.
and password on the label;

Publicidad

loading