Replacing The Camera Len - Bonoch BBM04 Manual Del Usuario

2.3 Replacing the Camera Len

Rotate to remove the decorative
ring of the original lens (please
keep the removed decorative ring
properly, it needs to be reinstalled
later when using the standard lens)
Step 2
Push the matching anchors into the holes. Screw on with a screwdriver,
leaving 1cm of the screw outside of the hole
Step 3
Align the camera with the protruding screw, press and hold it down
Take out the additional wide-angle
lens, align it and screw it in,
pay attention to make sure it is
installed in place
Note:
After installation, remove the
lens protection cover for
normal use
EN
05