Descargar Imprimir esta página

HOMCOM 820-296V90 Manual Del Usuario página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

8) Do not use this heater in the immediate surroundings of a bath, a shower or a
swimming pool
9) Do not use the appliance in area where gasoline, paint and flammable liquid are
used to stored.
10) Never cover anything on the heater during use.
11) To avoid current overload, do not share the use of a single socket with other
appliances.
12) The heater must not be located below a fixed socket.
13) If the power cord is damaged, it must be replaced by the manufacturer or its
maintenance agent or a similarly qualified person in order to avoid potential
hazards.
14) Never use the product with automatic power-on programmer, timer or other
types of installations.
15) In case of product failure, please contact after-sales service agent for
inspection and repairing. Unauthorized disassembling and replacement of parts
are not allowed.
16) The product shall be packed properly to prevent it from dust and kept in a well-
ventilated, dry place.
This appliance is not intended for use by persons (including children) whit reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Ⅳ . How to install
Free standing installation:
First, take the heater out the package and place it upside down on soft
surface. Second, take four screws from the accessories(two screw for
each castor, parallel the bevel of castor bracket to the bevel of the heater,
if installed reversely, the screw cannot be revolved in.)and aim them at
the taps to tighten them. Third, Then just upright the heater and put it
into use. You may refer to the following figure.
CAUTION:
2

Publicidad

loading

Este manual también es adecuado para:

820-296v90wt