Publicidad
EN
This instruction manual is a general installation instruction for the
three sizes.
Please read the installation instructions carefully before installation,
we hope the following instructions will be helpful for your
installation.
When each part is installed for the first time, the part number,
quantity and cross-section will be shown.
If there is no dimension shown in the lower left corner of the
installation steps page, it means that this is a general installation,
that is, this step is required for the installation of these three sizes.
If the dimensions are shown in the lower left corner of the
installation steps, please select the corresponding number of parts
to install.
If only "X" or "√" pattern is shown in the lower left corner of the
installation step, it means that the parts of this step have been
shown in the previous step, and the parts will not be shown, just
pay attention to the details.
The "X" pattern means that this model does not need to pay
attention to the detailed operation of this step, while the "√"
pattern means that this model needs to pay attention to the details
of this step.
It requires two people and take 3-4 hours for Installation.
02
Publicidad
