GETTING STARTED
How to Make Cocktails
1. Press Control Panel, rotate Selector Dial, or open and
close the Lid Handle to wake up machine. Lift Lid Handle
and insert a Cocktail Capsule in Capsule Holder with tab
facing front center position.
2. Lower Handle and press firmly until latch is in the fully
closed position.
NOTE: Once Capsule is punctured, the drink must be
made. The contents of the Capsule will drain if removed
from Holder before finishing drink.
3. Barcode Reader will recognize cocktail. Display will
indicate what type of glass to place under Dispenser,
and if ice is recommended. Drinks may also be
dispensed into a Shaker. After placing the appropriate
drink ware, press Next on Control Panel.
IMPORTANT: If Home screen is displayed after
puncturing Capsule, open Lid and wipe top of Capsule
and Barcode Reader with a soft, dry cloth and close Lid.
NOTE: If the spirit needed to make the cocktail is not
set in the program, machine will prompt to switch Spirit
Bottle in your choice of Spirit Bottle Port.
4. Rotate Selector Dial to see choices of strength:
Mocktail, Light, Regular, or Strong. Refer to Cocktail
Capsule Packaging to understand strength for each
cocktail. When desired strength is visible in display,
press Mix to select that strength.
5. Cocktail Machine will dispense appropriate spirit,
contents of Capsule, and water. Control Panel will show
a circle that tracks progress. Bubbles will appear in Spirit
Bottle as spirit is being dispensed.
6. Once drink is complete, lift Lid Handle to remove
Cocktail Capsule and dispose of recyclable container.
Cocktail Machine is ready for next drink.
NOTE: When finished making cocktails, remove Water
Reservoir and discard water, then replace Reservoir
on Base. Remove Capsule Holder and rinse with warm
water to remove residue. Using a damp cloth, wipe
underside of Lid and surrounding area before replacing
Capsule Holder.
|
10
Bartesian Customer Care 1.833.501.6889
Place a Highball Glass
With Ice
Under the Dispenser
Next
Spirit Strength
Mocktail
Mix