Descargar Imprimir esta página

Kenmore 795.7306 Manual De Instrucciones página 21

Publicidad

Idiomas disponibles

Idiomas disponibles

ADJUSTING
CONTROL
SETTINGS
Give the refrigerator
time to cool down completely
before making final adjustments.
It is best to wait 24
hours before doing this. The initial settings
mentioned
in SETTING
THE CONTROLS
section
should be correct
for normal
household
refrigerator
use. The controls
are set correctly
when milk or juice
is as cold as you like and when ice cream is firm.
The refrigerator
control functions
as the thermostat
for the entire appliance
(refrigerator
and freezer
sections).
The colder the setting, the longer the
compressor
will run to keep the temperature
colder.
The freezer
control adjusts the cold air flow from the
freezer to the refrigerator.
Setting the freezer
control
to a lower temperature
keeps more cold air in the
freezer
compartment
to make it colder.
If you need to adjust temperatures
in the refrigerator
or freezer,
start by adjusting
the refrigerator
and
allow 24 hours for the temperatures
to stabilize.
If it
is still too warm or too cold, then adjust the freezer
control.
Always remember to wait at least 24 hours
between adjustments.
CONDITION/
RECOMMENDED
REASON:
ADJUSTMENT:
[] REFRIGERATOR
section too
warm
- Door opened often
- Large amount of food added
- Room temperature very warm
Set REFRIGERATOR
control one degree lower
C or two degrees lower F,
wait 24 hours, then re-
check
[] FREEZER section too
warm/ice not made fast enough
- Door opened often
- Large amount of food added
- Very cold (below 55 °F) room
temperature (Compressor
does not cycle often enough).
- Heavy ice usage
- Air vents blocked by items
Set FREEZER control
one degree lower C or two
degrees lower F, wait 24
hours, then re-check
Move items out of
airstream
[] REFRIGERATOR
section too
cold
- Controls not set correctly for
your conditions
Set REFRIGERATOR
control one degree higher
C or two degrees higher F,
wait 24 hours, then re-check
[] FREEZER section too cold
- Controls not set correctly for
your conditions
Set FREEZER control
one degree higher C or two
degrees higher F, wait 24
hours, then re-check
21

Publicidad

loading