Haier HRQ04WNA HRQ04GNB Manual Del Usuario página 10

Idiomas disponibles

HRQ04WNA/HRQ04GNB

10/22/01

12:23

P_}

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii,

9. Align

the pin of the top hinge with top hole on the left

side of the door and push into place. Replace the screws in the

upper hinge bracket

but do not tighten

all the way.

10. Make sure the door closes easily but forms a tight seal.

Adjust

the door as needed.

Once you are satisfied with the door

alignment,

completely

tighten the upper door hinge screws,

1 1. Replace the hinge cover,

insert the screw and

tighten completely.

(see fig. # 2)

12. If the door does not close properly,

refer to the

section titled "Door Alignment".

screw hole plug

door pin

lower hinge bracket

fig. # 3