Quooker Cold Water Filter Instrucciones De Uso página 2

en Tips for use
General
The Cold Water Filter is designed to reduce unpleasant tastes and odours in the water.
Flush the filter before first time use, to remove carbon residue, by running the cold water
on the filtered setting for 5 minutes. This excess carbon residue can turn the water black
for a few seconds. This is not harmful.
How to dispense filtered water – Flex, Fusion, Nordic single tap
Filtered water can be dispensed by pushing and holding down the textured ring on the Flex,
Fusion or Nordic single tap until the LED ring turns blue, and turning it (fig. 1). The blue light will
remain lit while filtered water is activated.
How to dispense filtered water – Front tap
fig. 1
Filtered water can be dispensed by pushing and turning the textured ring on the Front tap (the
LED ring turns blue) (fig. 2). The blue light will remain lit while filtered water is activated.
Replace the filter's cartridge
Due to hygienic reasons the filter's cartridge must be replaced every 12 months, regardless
of volume of usage. After 12 months, an alarm will sound to indicate that the cartridge needs
to be replaced.
The filter is installed underneath the counter top. Instructions on how to replace the cartridge
are available on the cartridge label.
fig. 2
Snooze the alarm
When the alarm sounds it can be snoozed for 7 days by pressing the red button, located on the
Cold Water Filter (fig. 2), providing time to order a new cartridge at quooker.com
Flush after periods of non-usage
After periods of non-usage, for instance after holidays, it is good practice to flush through your
Cold Water Filter to remove stale water. This can be done by simply running the filtered water
for 5 minutes.
Warranty and service
The warranty period is two years and covers supply of parts only. It does not cover labour costs.
In case of a fault, first try resetting the system. This can be done by switching off the Quooker
fig. 3
boiling water tank via the Q-shaped on / off switch on the top of the tank, waiting one minute
and then switching the tank on again. If the problem remains, please contact your installer
or supplier.
Liability
The Cold Water Filter has been manufactured to the highest quality and design standards.
In accordance with the warranty conditions, the manufacturer does not accept liability for
any adverse consequences of using this product.