PEWA Metrix MX 58HD Manual De Instrucciones página 30

4.5. HOLD key
Short press : Sets the display on the current value.
Long press : Accesses or quits the "autostore" mode. Can be accessed in the V
positions.
Autostore
Set the probes on the point to be measured. An audio signal indicates if the measurement is
stable. When you remove the probes, a second audible signal indicates that this stable value
displayed has been stored.
4.6. PRINT key
This key operates with the optional serial interface for printer or PC :
Short press : Activates / deactivates « send measures to printer » mode at the rate defined
by the user.
Long press : Adjusts the rate varying from 00000 s (a single transmission) up to 9h 59min
59s, using the SEL/ON key (selection of digits) and the RANGE key
(increment the selected digit).
26
Chapter II
, mV, V
DC AC
Portable digital multimeter