Installation Method; Transportation; Unpacking; Installation - gc Labolight DUO Instrucciones De Uso

Unidad de fotopolimerización led dual para resinas de composite indirecta
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 118

4. Installation Method

4.1 Transportation

● Care should be taken for avoiding impact on the unit by arranging it at level during transportation.
● Use dedicated packing materials.
For the safe disposal and recycling of the packaging, please ensure that all packing materials are properly
disposed of according to current recycling regulations.

4.2 Unpacking

Verify all components are delivered prior to installation and assembly (see Section 3.1, "Content of the
package"). In addition, check for any damage of the unit during transportation.
Contact the dealer or GC in case any missing or damaged component is found.

4.3 Installation

1) Install the unit with care being taken for the following:
− Place the unit on a level and fi re-resistant bench or platform.
− For temperature, humidity, and atmospheric pressure in the use environment, see Chapter 9,
"Specifi cations."
− For dimensions and weight of the unit, see Chapter 9, "Specifi cations."
Area of installation: Approx. 200mm × 350mm
■ Do not install the unit in a place where chemicals are stored or gas is generated.
■ Do not place fl ammable objects near the main body. Otherwise, fi re could be caused.
■ Do not place any equipment susceptible to light or heat in the unit's surroundings.
■ Take care to ensure the stability of the unit in relation to inclination, vibration, and impact, for example.
● When carrying the main body, hold it on the bottom by both hands with the door closed.
● Use the unit indoor.
● Install the main body on a level place.
● Install the unit in a place where not receiving any adverse effect from direct sunlight, dust, dampness, air
containing salt and sulfur, or a heater nearby.
● Install the unit in a place where no water splashes.
● Install the unit in a well-ventilated place.
2) Verify that a movable range of the door is ensured.
■ When opening / closing the door, do not allow your hand or part of your body or the object to enter into
below the door or the gap. Otherwise, personal injury or property damage could be caused.
EN 12
Note
CAUTION
CAUTION
Note
CAUTION

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para gc Labolight DUO

Tabla de contenido