INSTAllATION INSTRUCTIONS
CHOOSE THE PROPER LOCATION
WARN|NG
• Washer is heavy! Two or more people
are required when moving and unpacking
the washer. Failure to do so can result in back
or other injury.
• Store and instaU the washer where it will not
be exposed to temperatures
below freezing
or exposed to outdoor
weather conditions.
Failure to follow this warning can cause serious
injury, fire, electrical shock, or death.
• Properly ground washer to conform
with all
governing
codes and ordinances.
Failure to
follow this warning can cause serious injury, fire,
electrical shock, or death.
• To reduce the risk of electric
shock, do not
install the washer in humid spaces. Failure to
follow this warning can cause serious injury, fire,
electrical shock, or death.
• The base opening must not be obstructed by
carpeting when the washer is installed on a
carpeted floor.
• Do not remove ground prong. Do not use
an adapter or extension cord. Plug into a
grounded
3=prong outlet.
Failure to follow this
warning can cause serious injury, fire, electrical
shock, or death.
Power
Outlet
• The power outlet must be within 60 in. (1.5 m) of
either side of the washer.
• The appliance and outlet must be positioned so
that the plug is easily accessible.
• Do not overload the outlet with more than one
appliance.
• The outlet must be grounded in accordance
with
current wiring codes and regulations.
• Time-delay fuse or circuit breaker is
recommended.
NOTE: It is the personal responsibility
and
obligation of the product owner to have a
proper outlet installed by a qualified electrician.
CLEARANCES
1_293/4"_
(75.6 cm)
54 "_
(1295
cm)
(10 cm)
(25 cm)
(25 cm)
(68.6 cm)
To ensure sufficient clearance for water lines and
airflow, allow minimum clearances of at least
1 in. (2.5 cm) at the sides and 4 in. (10 cm)
behind the unit. Be sure to allow for wall, door,
or floor moldings that may increase the required
clearances.
Allow at least 24 in. (61.2 cm) in front of the
washer to open the door.