PRIXTON BIKE FIT BF200 Manual De Instrucciones página 15

ASSEMBLY INSTRUCTIONS
1.Install the Ball Pin
Pull the ball pin out to expand the main frame.
2. Install the Front and Rear Stabilizers
Loose the screws in the stabilizer, and insert them into the
corresponding grooves and tighten in each stabilizer.
3. Install the Handlebar and control Panel
Place the handlebar onto the corresponding grooves in
the main frame, tighten it with bolts and gaskets. Connect
the cords with the corresponding slots， and then place the
control panel onto the main frame and tighten.
15