LEGRAND C2G C2G31015 Manual Del Usuario página 7

HDMI Ultra-Slim HDBaseT + RS232 And IR Over Cat Extender Box Receiver - 4k 60hz
RS232 Pass-through
RS232 port can be used for bi-directional RS232 signal pass-through
between the transmitter and receiver.
Steps to set up for RS232 pass-through:
1. Connect a RS232 Master (or Slave) Device to RS232 port of the
transmitter with a RS232 cable.
2. Connect a RS232 Slave (or Master) Device to RS232 port of the
receiver with a RS232 cable.
3. Connect HDBT OUT of the transmitter to HDBT IN of the receiver
with a Cat 5e/6/6a/7 cable.
When all is set, RS232 signal can be passed through bi-directionally
between two RS232 devices.
5
(us) (us)
(us)