Project Source UEP2484 Manual Del Usuario página 6

ASSEMBLY INSTRUCTIONS
3. Using a clamp, attach cover panel to the exposed
side of the cabinet box.
From the inside of the cabinet box, use the csk
screws and secure through the cabinet hole.
Be careful do not counter-sink the screws into the
cabinet as they could pierce through the cover
panel
Hardware Used
AA
CSK screw 1
(Not included)
1. Line up the cover panel to be flush with the top
and back edges of the cabinet box
2. The cover panel will exceed the front and bottom
of the cabinet. This is to accommodate the door/
drawer front and and toe kick molding.
3
x 4
1
2
6
AA
UEP2484